TEC MA-600 Series Programming Manual page 137

6. TERMINAL FILE PROGRAMMING
6.23.2 Deletion
To delete a PLU with sales data of zero:
CONDITION
To delete a PLU with sales data of not zero: After PLU Reset
OPERATION
Mode Lock: SET
Individual PLU Deletion:
1) Menu Tree
2) Operation Flowchart
Depress [↓] twice then [Enter].
Depress [↓] then [Enter].
Depress [↓] three times then [Enter].
Input a PLU code to be deleted.
3) Example
To delete PLU Code 0501 (Tuna Can) that was once programmed.
Operation
When the ECR is being outside a sale
and in SET mode, depress the [↓] key
twice.
Depress the [3] or [Enter] key.
The programmed PLU data is deleted individually.
Main Menu
or
Depress [3].
or
Depress [2].
or
Depress [4].
[PLU]
[End]
(continued on the next page)
6-117
Any time outside a sale
ECR is being outside a sale and in SET mode.
"3 DP/PLU" for Department/PLU table programming is selected.
"2 PLU" is selected.
"4 DELETE (INDIV)" is selected.
Max. 4 digits: 1 to 9999
The specified PLU is deleted.
This operation is ended. A long receipt is issued and the display
returns to Main Menu screen.
LCD Display
6.23 PLU Table Programming
Remarks
The cursor is moved on to "3 DP/PLU".
EO3-11106