Plu Preset-Code Key Setting - TEC MA-600 Series Programming Manual

6. TERMINAL FILE PROGRAMMING
6.25

PLU Preset-Code Key Setting

When there are any keys programmed as PLU Preset-code Keys (SFKC 96) on the ECR Keyboard (ordinary or
Flat type), and /or when the PK-2 PLU Keyboard (hardware option) is connected to the ECR, a PLU code may be
preset to each of those keys in this operation.
CONDITION
Any time outside a sale
OPERATION
Mode Lock: SET
1) Menu Tree
2) Operation Flowchart
• For PLU Preset-Code Key (SFKC 96)
Depress [↓] twice then [Enter].
Depress [↓] then [Enter].
Depress [↓] twice then [Enter].
Depress [↓] then [Enter].
Input a desired key location code.
Main Menu
or
Depress [3].
or
Depress [2]
or
Depress [3].
or
Depress [2]
Input a PLU Code.
[Enter]
[Enter]
[End]
ECR is being outside a sale and in SET mode.
"3 DP/PLU" is selected.
"2 PLU" is selected.
"3 ASSIGN TO KEYBOARD" is selected.
"2 PLU CODE KEY" is selected.
A 4-digit PLU code to be assigned to a key is specified.
See Key Location Code on the next page.
This setting is ended. A long receipt is issued and the display
returns to Main Menu screen.
6-123
EO3-11106
6.25 PLU Preset-Code Key Setting