Glass Media Installation - kozy heat MPS-30 Minneapolis Installation Manual

GLASS MEDIA INSTALLATION

USE ONLY #113 SERIES GLASS MEDIA (13 lbs. / 5.9 kg) IN THIS FIREPLACE.
DO NOT SUBSTITUTE MATERIALS OR USE MORE THAN SPECIFIED.
WARNING
DO NOT BLOCK PILOT ASSEMBLY WITH GLASS MEDIA!! A BLOCK PILOT MAY CAUSE DELAYED IGNITION!!
GLASS MEDIA MUST BE NO MORE THAN ONE LAYER DEEP ACROSS ENTIRE BURNER / SCREEN AREA TO
AVOID POSSIBLE DELAYED IGNITION AND/OR SOOTING ISSUES.
Install glass media one layer deep onto burner tray, being careful not to block pilot assembly. Save any unused media for future use.
This area must remain open
Figure 14b
14