kozy heat MPS-30 Minneapolis Installation Manual page 28

REMOTE FLAME CONTROL
The remote control has six (6) flame levels. With system ON and flame level at maximum, press Down Arrow Key once to reduce flame
height by one step until flame is turned off. The Up Arrow Key will increase flame height on step each time it is pressed. If Up Arrow Key
is pressed while system is on but flame is off, the flame will come on in High position. A single 'beep' will confirm reception of the
command.
Figure 8a
ROOM THERMOSTAT (Transmitter Operation)
The remote control can operate as a room thermostat. The thermostat can be set to desired temperature to control a rooms comfort level.
To activate this function, press the Thermostat Key. The LCD display will change to show the room thermostat is ON and set temperature is
now displayed. To adjust set temperature, press Up or Down arrow keys until desired set temperature is display on LCD screen.
Figure 8b
SMART THERMOSTAT (Transmitter Operation)
The Smart Thermostat function adjusts flame height based on set temperature and actual room temperature. As room temperature gets closer
to set point the Smart Function will automatically adjust flame down.
1. Press Thermostat key until the word SMART appears on right side of temperature bulb graphic.
2. To adjust set temperature, press Up/Down arrow keys until desired set temperature is displayed on LCD screen.
Figure 8c
SYSTEM OPERATION
8