Options; Rm-D1000 Rack Mounting Kit; If-Td1000 Digital Input Kit - Tascam TM-D1000 Operation Manual

A number of options are available for the TM-
D1000, as described here.

13.1RM-D1000 rack mounting kit

The RM-D1000 rack mounting kit allows the TM-
D1000 to be mounted in 6U of rack space (in addi-
tion to space needed at the top for the connectors).
You should also ensure that the rack is well-venti-
lated, allowing air to circulate for cooling the heat
sink of the TM-D1000.
1
The wristpad below the faders should be
unscrewed before mounting the TM-D1000
in a rack.
2
Attach the two rack mounts to the TM-
D1000 using the five screws (provided) on
each mount.
3
Fit the TM-D1000 into the rack, allowing
enough space at the top for cables to be fitted
to the connectors.

13.2IF-TD1000 Digital Input Kit

This kit provides two more sets of digital inputs
(XLR and RCA), capable of receiving AES/EBU or
SPDIF format, as well as another TDIF-1 connector,
for another eight channels of DTRS-compatible
audio.
WARNING
This kit requires internal connections to the
TM-D1000. For this reason, you should not
install the kit yourself, but should refer instal-
lation to a qualified TASCAM distributor.
The digital inputs are labeled
B is available as an extra option in the following
menus where input is available:
A
Setup Digital Input
•
Setup Aux Rtn
•
Assign
Setup Eff Return
•
Input/Assign
Digital input C is treated differently, on account of
the frequency conversion facility built into digital
input . An additional menu is available when the IF-
C
TD1000 Digital I/O Board is fitted, which allows
input channels 7 and 8 to be assigned to digital input
or to the analog inputs, for all menus using these
C
inputs.
This sub-menu is available from the Setup options,
and appears as follows:
C h 7 - 8 R o u t e 1
D i g i t a l
Use the data entry knob to choose between
Digital In C
and
As well as the additional stereo digital inputs, the IF-
TD1000 Digital I/O Board also provides another
TDIF-1 connector (TDIF-1 B). This set of 8 channels
is available for use by the input channels, as set in the
following menus:
Setup Ch1-8
•
Setup Ch9-16
•
System TDIF-1 A/B
•
Word Length
The routing of group busses to the second TDIF-1
channel follows the pattern of the routing to the first
channel (i.e. if groups 1 & 2 are routed to TDIF-1 A
TASCAM TM-D1000 Operations Manual

13 - Options

and . Digital input
B C
Input/
T a r g e t
I n C ?
Analog
.
Input
Input
34