Locating To A Memory Position; Editing A Memory Location - Tascam TM-D1000 Operation Manual

11 - MIDI Machine control

11.6Locating to a memory position

Locating to a memory position is done by holding
down the key and pressing the
SHIFT
the channel (location memory) to which you will be
locating.

11.7Editing a memory location

1
Press the key so that the display
MEMO
MEMO Edit
shows
NOTE
If MIDI Timecode is currently being received
at the jack, you must press the
MIDI IN
key twice to obtain the
sage. If MIDI Timecode is not being received,
you only need to press the
31
TASCAM TM-D1000 Operations Manual
key of
CH SEL
on the top line.
MEMO
MEMO Edit mes-
key once.
MEMO
2
Press the key of the memory location
CH SEL
you want to edit.
A memory location which has not been used (no
value has been captured for it) will show
00h00m00s00f as the location value.
3
Push and turn the DATA ENTRY
move the cursor.
4
Turn the DATA ENTRY
of the field highlighted by the cursor.
Operating Tip
You can also use the
CH SEL
number keys. The
CH SEL
through 9 enter their respective numerals,
and the key of channel 10 acts as a 0
CH SEL
key.
5
After checking that the new values are cor-
rect, press the ENTER
setting.
knob to
knob to set the values
keys here as
keys of channels 1
key to confirm your