Table of Contents
Advertisement
IMPORTANT SAFETY INSTRUCTIONS
Required Safety Precautions for Gates
Install Warning Signs
Warning signs alert people of automatic gate operation and are required when installing the GTO® Access Systems Gate
Opener. Furthermore, a walk-through gate must be installed if pedestrian traffic is expected near the vehicular gate. We
recommend using the GTO Bulldog Pedestrian Gate Lock (Call the GTO Sales Department) for controlled access.
Bulldog Pedestrian
(recommended, not included
Pedestrian Gate
Entrapment Protection
GTO's inherent obstruction settings, even when properly adjusted, may not be sensitive enough to prevent bodily injury in
some circumstances. For this reason, safety devices such as safety edge sensors (or photoelectric sensors), which stop and
reverse gate direction upon sensing an obstruction, are suggested for enhanced protection against entrapment.
Warning Signs
The warning signs (at right) must
be installed on both sides of the
gate (see page 7 for details).
Gate Lock
)
Contact Sensor
(recommended, not included)
Contact Sensor
(recommended, not included)
Warning Sign
Vehicular Gate
!
WARNING
Moving Gate Can Cause
Injury Or Death
1. KEEP CLEAR! Gate may move at any time.
2. Do not allow children to operate gate or
play in gate area.
3. This gate is for vehicles only. Pedestrians
must use a separate entrance.
6
Contact Sensor
(recommended, not included)
Hide quick links:
Advertisement
Table of Contents
