Table of Contents
Advertisement
Connector:
Digital Audio Output:
Connector:
Digital Output Level:
External Sync Input:
Connector:
External Sync Range:
Connector:
Remote Control Methods:
Connectors:
GPI Interface:
Connector:
EMI-suppressed RJ-45 female pinned according to StudioHub+
standards. Transformer isolated, balanced, and floating according to AES3
standard.
Stereo per AES3 standard. Digital Output sample rate can lock to the
input, lock to an additional external sync source, or use the internal 48kHz
rate.
EMI-suppressed RJ-45 female according to StudioHub+ standards.
Transformer isolated, balanced, and floating according to AES3 standard.
-24.0 to 0.0 dBFS peak, software adjustable in 0.1dB steps.
External Sync: Allows the output sample rate to be synchronized to an
AES3 signal applied to the Ext. Sync input connector. (Does not accept
Word Clock inputs)
EMI-suppressed RJ-45 female according to StudioHub+ standards.
Transformer isolated, balanced, and floating according to AES3 standard.
Automatically accepts sample rates between 32kHz and 96kHz.
EMI-suppressed RJ-45 female pinned according to StudioHub+
standards, Transformer isolated, balanced, and floating according to AES3
standard.
External Modem or 10/100BaseTX Ethernet.
--Modem (support not yet available as of software version 2.2): User-
supplied Hayes command compatible external serial modem connected to
rear-panel DB-9 male serial port.
-- Ethernet: TCP/IP control via web page interface and Java (TM) remote
control program included in the web pages. All software is served from
the built-in web server; there is nothing to install on the user's computer.
Ports Used: The defaults are TCP Ports 4545 and 4546 (for control and
metering data, respectively).
Modem port - EMI-suppressed DB-9 male connector.
Ethernet - Industry standard EMI-suppressed RJ-45 connector.
Support not yet available as of software version 2.2.
EMI suppressed DB-9 female connector.
85
Advertisement
Table of Contents
