Omnia Stereo Audio Processor Installation And Operation Manual page 103

Stereo audio processor
Table of Contents

Advertisement

Connectors:
GPI Interface:
Connector:
Power Requirements: Voltage: 100-250 VAC, 47-63 Hz., Less than 40 VA.
Power Connector:
Power Supply:
Environmental:
Dimensions:
Shipping Weight:
StudioHub is a registered trademark of Radio Systems.
Telos/Omnia Research and Development is constantly working to improve the quality of our products.
Actual specifications are subject to change or improvement without notice.
--Modem (support not yet available as of software version 2.2): User-
supplied Hayes command compatible external serial modem connected to
rear-panel DB-9 male serial port.
-- Ethernet: TCP/IP control via web page interface and Java (TM) remote
control program included in the web pages. All software is served from
the built-in web server; there is nothing to install on the user's computer.
Ports Used: The defaults are TCP Ports 4545 and 4546 (for control and
metering data, respectively)
Modem port - EMI-suppressed DB-9 male connector.
Ethernet - Industry standard EMI-suppressed RJ-45 connector.
Support not yet available as of software version 2.2.
EMI suppressed DB-9 female connector.
EMI suppressed IEC male.
Detachable 3-wire power cords supplied for US and European use.
Internal. Overvoltage and short circuit protected. Meets EN55022,
EN55011 Level B Conducted Emissions. EN61000-4-2, -3, -4, -5, -6 level
3 immunity compliant. Full international safety approval. CE marked.
Operating Temperature: 32 to 122 deg. F / 0 to 50 deg. C for all operating
voltage ranges. Humidity: 0-95% RH, non-condensing.
19" wide x 1.75" high x 16" deep (48.26cm wide x 13.335 cm high x
40.64 cm deep) including connectors. Unit requires one EIA rack space
for mounting.
12 lbs. / 5.5 kg
89

Advertisement

Table of Contents
loading

This manual is also suitable for:

One

Table of Contents