Table of Contents
Advertisement
Analog Audio Output:
D/A Conversion:
Connectors:
Digital Audio Input: Configuration: Stereo per AES/EBU standard, CS8420 Digital Audio
Connector:
Digital Audio Output:
Connector:
Digital Output Level:
External Sync Input:
Connector:
External Sync Range:
Connector:
Remote Control Methods:
Left/Right Stereo. Electronically balanced.
Output Impedance 20 ohms.
Minimum load Impedance: 600 ohms.
Output Level adjustable from -2 dBu to +22dBu peak in 0.1dB steps.
Crystal Semiconductor CS4391, 24 bit, 128x oversampled.
Two, EMI-suppressed XLR-male. Pin 1 chassis ground, Pin 2 "Hot".
Transceiver with 24 bit resolution, software selection of stereo, mono
from left, mono from right or mono from sum. Automatically accepts
and locks to input sample rates between 32 and 108 kHz.
EMI-suppressed RJ-45 female pinned according to StudioHub+
standards. Transformer isolated, balanced, and floating according to AES3
standard.
Stereo per AES3 standard. Digital Output sample rate can lock to the
input, lock to an additional external sync source, or use the internal 48kHz
rate.
EMI-suppressed RJ-45 female according to StudioHub+ standards.
Transformer isolated, balanced, and floating according to AES3 standard.
-24.0 to 0.0 dBFS peak, software adjustable in 0.1dB steps.
External Sync: Allows the output sample rate to be synchronized to an
AES3 signal applied to the Ext. Sync input connector. (Does not accept
Word Clock inputs)
EMI-suppressed RJ-45 female according to StudioHub+ standards.
Transformer isolated, balanced, and floating according to AES3 standard.
Automatically accepts sample rates between 32kHz and 96kHz.
EMI-suppressed RJ-45 female pinned according to StudioHub+
standards, Transformer isolated, balanced, and floating according to AES3
standard.
External Modem or 10/100BaseTX Ethernet.
88
Advertisement
Table of Contents
