Table of Contents
Advertisement
AAC/SBR
Output LPF
8kHz
24kbps
10kHz
32kbps
13kHz – 16kHz 48kbps
48kbps
16kHz
64kbps
Always set the low pass filter frequency so that it is at or below half the sampling frequency of the encoder.
This must be done in order to comply with the Nyquist Theorem
audio quality.
1
The Nyquist Theorem states that the maximum frequency that may be applied to a sampled data system is one
half the sampling frequency. When signals beyond half the sampling frequency are present, aliasing occurs
which causes the appearance of an inverted spectral image of the audio spectrum to be "folded around" the
lower side of the sampling frequency (it is actually folded symmetrically around both upper and lower
sidebands of the sample frequency, however in professional audio applications only the lower sideband is
usually audible). When this occurs the original signals and the aliases are not separable by any means!
<-Exit
Click on this option to return to the Adjust Processing submenu.
<-Exit
Click on this option to return to the Processing menu.
MP3
Output LPF
6kHz
24kbps
6kHz
32kbps
8kHz – 10kHz 48kbps
10kHz – 16kHz 64kbps
64kbps
!!!--- IMPORTANT NOTE ---!!!
59
WMA
Output LPF
5kHz - 6kHz
24kbps
8kHz
32kbps
10kHz – 13kHz
13kHz – 16kHz
. Doing so will achieve the highest perceived
1
Advertisement
Table of Contents
