Table of Contents
Advertisement
Figure 10
Activate new
firmware
44
SAN16M-R SAN Router Installation And Service Manual
Firmware Upgrade dialog box
The dialog box shows the previous version, the build date, and
the active/inactive status of both firmware locations. The TFTP
server address and file name are blank the first time the dialog
box displays. If the dialog box is displayed again later, the last
contents are displayed.
2. Enter or edit the TFTP server IP address where the firmware
image is stored.
3. Enter or edit the fully qualified path and file name on the TFTP
server for the new firmware. The path is relative to the "root"
directory defined in the TFTP server.
4. Click the Download button. When you download a new version, it
is always saved in the inactive location.
To activate the new firmware, follow these instructions:
1. Click the Activate button.
The Activate Boot Location dialog box displays both firmware
locations and their respective build dates.
Advertisement
Table of Contents
Troubleshooting
