Cable guidelines
28
SAN16M-R SAN Router Installation And Service Manual
Compatible cable types
Table 12
Type of Cable
62.5 um Multi-Mode Fiber Optic
FC/GE
50 um Multi-Mode Fiber Optic
FC/GE
9 um Single Mode Fiber Optic
Copper
ATTENTION! Review and implement the following cable guidelines to
avoid signal interference or cable damage.
•
Use RJ45 cable for the Network Management port.
•
Use DB9 null modem cable for the console port.
•
Confirm you have appropriate cables to attach the devices, for
example the server and targets.
•
Do not bend fiber optic cables to a radius smaller than three (3)
inches. Doing so could result in serious degradation in
performance or complete loss of connectivity.
•
Do not lay copper cables near transformers or alongside power
cables for any distance. Doing so could introduce noise into the
signaling.
•
Avoid laying cables near sharp edges or where objects or other
equipment can crush them.
•
Laser types at each end of any link must match.
Range
2-300 m
2-500 m
2m-10 Km
0-30 m (equalized cable)
0-10 m (unequalized cable)
SFP Type
Short wave
laser
Short wave
laser
Long wave
laser
Copper (FC
HSSDC2)