Front Panel; Sun Fire V240 Server; Keyswitch Positions - Sun Microsystems Sun Fire V210 Quick Start Manual

3
Attach the Cables
Sun Fire V210 Server
10101
SERIAL MGT
Power inlet NET MGT

Sun Fire V240 Server

10101
SERIAL MGT
Power inlet NET MGT
See the See the Sun Fire V210 and V240 Server
Installation Guide for more details. for more details.
4

Front Panel

SCSI
USB
NET 0-3
SCSI
Sun Fire V210 Server
Hard disk drive Hard disk drive
USB
NET 0-3
Sun Fire V240 Server
Hard disk drive Hard disk drive
Locator Locator
Service required
Server active
On / Standby switch On / Standby switch
Front bezel Front bezel DVD-ROM drive DVD-ROM drive
Locator Locator
Service required
Server active
Open bezel Open bezel
System keyswitch System keyswitch
On / Standby switch On / Standby switch
Front bezel Front bezel DVD-ROM drive DVD-ROM drive
5 5
Sun Fire V240 Server

Keyswitch Positions

Open bezel Open bezel
Ensure keyswitch is in Normal ( ) position
before continuing (Sun Fire V210 Server does
System System
configuration configuration
not have a keyswitch).
card card
6
Server Power On and Operation
1. Set up a console connection to the server
using the server's SERIAL MGT port.
2. Power on either from the keyboard or by
using the On/Standby switch.
Note: the server goes into Standby power
mode as soon as the power cable is connected
to the power inlet.
See the Sun Fire V210 and V240 Server
System System
Installation Guide for more details.
configuration configuration
card card
Normal Normal
Forced Forced
standby Locked Locked
Diagnostics Diagnostics