Power Supplies - Nikon SMZ1500 Instructions Manual

Power supplies

3
Use the Power Supply XN A for regions using 100/120 V power, and the
Power Supply TN-PSE30W A for regions using 230 V power. Insert the
plug of the Halogen illuminator into the output connector located on the
rear of the power supply.
Check that the voltage displayed matches the
voltage used in your area. If the voltages do
not match, do not use the power supply and
contact your Nikon representative.
Power Supply XN A (only for regions with 100/120 V power)
Power Supply TN-PSE30W A (only for regions with 230 V power)
26
Input voltage display
Power switch
Brightness adjuster
Changes the illumination brightness when rotated.
Brightness adjuster
Changes the illumination
brightness when rotated.
Power switch
Fuse
Always use the fuse
specified.
(Rear view)
Power cord
Output connector
Connect the
lamphouse cable here.
Input voltage display
Check that the voltage displayed
matches the voltage used in your area.
If the voltages do not match, do not
use the power supply and contact your
Nikon representative.
Power cord
Connect the specified power
cord here.
(Rear view)
Output
connector
Connect the
lamphouse cable here.
AC input connector