Nikon SMZ1500 Instructions Manual page 29

Power Supply XN A (only for regions with 100/120 V power)
Input rating
Output rating
Fuse rating
Power Supply TN-PSE30W A (only for regions with 230 V power)
Input rating
Voltage fluctuation
Output rating
Internal fuse
Operating
environment
Storage
environment
Protection class
Power cord
Power supply for 100V regions only:
100 VAC, 50/60 Hz, 30 W
Power supply for 120V regions only:
120 VAC, 50/60 Hz, 30 W
3-6 VAC, 3.3 A
250 V, 1 A
230 VAC, 50/60Hz, 0.3A
±10%
AC 6V 5A
Fast acting type, F1A/250V, 5.2 × 20 mm
Altitude:
Temperature:
Relative humidity: 85% max.
Pollution level:
Installation:
Temperature:
Relative humidity: 90% max.
Class I
Use only the following power supply cord.
Using the wrong power cord could result in
danger or fire. The protection Class I equipment
should be connected to PE (protective earth)
terminal.
• For 220-240 VAC area
Approved according to EU/EN standards, 3
conductor grounding Type H05VV-F, 3 m
long maximum, rated at 250 VAC minimum.
Illuminator
2000 m max.
0°C to +40°C
(indoor use only)
(no condensation)
Degree 2
Category II
-20°C to +60°C
(no condensation)
V
27