Nikon SMZ1500 Instructions Manual page 21

Insert the pillar spacer until it reaches
1
the bottom of the pillar. (After step
in II "Assembly" on p.10)
Mount the zooming body to the P-FMD
2
focusing mount.
Attach the positioning pin to the
3
positioning pin hole in the zooming
body using a flat-blade screwdriver.
Insert the positioning pin on the
4
zooming body into the positioning
groove of the P-OTR double nosepiece
to fit them.
Rotate the objective mounting plate
5
holding the P-OTR double nosepiece by
hand to set the plate at a position where
the two attaching tool slits at the bottom
of the zooming body connection are
visible.
Insert the tool into the attaching tool
6
slits, and rotate the tool to secure the P-
OTR double nosepiece to the zooming
body.
Using Accessories
1
Pillar spacer
Positioning pin
Zooming body
Objective
mounting
plate
Attaching tool slits
Bottom view
IV
Zooming body
Positioning
pin hole
Positioning
groove
Tool
19