Power Supplies - Nikon SMZ745T Instructions Manual

Power supplies

6
Use the Power Supply XN A for regions using 100 to 120 V power, and
the Power Supply TN-PSE30W A for regions using 230 V power. Insert
the plug of the halogen illuminator into the output connector located on
the rear of the power supply.
Power Supply XN A (for regions with 100 to 120 V power only)
Input voltage display
Check that the voltage displayed matches the
voltage used in your area. If the voltages do
not match, do not use the power supply and
contact your nearest Nikon representative.
Input rating
Output rating
Fuse rating
Power cord
Power switch
Brightness adjuster
Changes the illumination
brightness when rotated.
Power supply for 100 V regions only:
100 VAC, 50/60 Hz, 30 W
Power supply for 120 V regions only:
120 VAC, 50/60 Hz, 30 W
3 to 6 VAC, 3.3 A
250 V, 1 A
Using Accessories
Fuse
Always use the specified
fuse (250 V, 1 A).
(Rear view)
Output connector
Connect the
lamphouse cable here.
IV
21