I Nomenclature - Nikon SMZ1500 Instructions Manual

I
Nomenclature
The figures on p.8 and 9 shows a SMZ1500 combined with P-BT
binocular eyepiece tube, C-W10X eyepieces, HR Plan Apo 1X objective,
P-FMD focusing mount, and C-PS160 plain stand.
Diopter ring
Refer to "Adjust the
diopter" on p.12.
Eyepieces
10X, 15X, 20X and
30X eyepieces are
available.
Eyepiece tube
clamp screw
Zooming body
Diaphragm control dial
Objective
HR Plan Apo 0.5X, HR
Plan Apo 1X and HR Plan
Apo 1.6X objectives are
available. Plan Apo and
ED Plan series objectives
for SMZ1000/ 800 can be
used also, but the
magnification in this case
becomes 0.8 times the
magnification indicated on
the objective itself,
moreover the periphery of
the viewfield will be
slightly darkened when
the zooming magnification
is 1X or lower. Refer to
Table 1 on p.35.
Groove for mounting
accessories
Holds the Fluorescent
ring illuminator, Fiber
optic ring illuminator and
the like. Outside
diameter: ø60
Stage plate clamp
screw
Fixes the stage plate to
the stand base.
8
Eyepiece sleeve
P-BT Binocular
eyepiece tube
P-BTL low eye-level
eyepiece tube and P-
BERG tilted eye-piece
tube are also
available.
Zooming knob
Changes the
magnification of the
sample image. Refer
to "Zoom" on p.14.
Zooming knob clicks
ON/OFF screw (inside)
Refer to "ON/OFF of
the Zooming Knob
Clicks" on p.14.
Cover for zooming
body clamp screw
(Screw is inside.)
Stand
C-PS160 Stand base
Various stands are
available.
Screw for mounting
accessories
Holds the 1/4 lambda
plate and the like.
The screw on the
inside diameter:
M55 × 0.75
Stage plate
The black or the white
side can be chosen
according to the
sample.