Zoom; Change The Zooming Magnification; Diaphragm - Nikon SMZ1500 Instructions Manual

3

Zoom

Change the zooming magnification.

1
Turning the zooming knobs on the left and right side of the zooming body
will change the magnification of the sample image.
■ Total Magnification
The zooming knob has the indication of the zooming magnification.
The total magnification can be found by multiplying the magnification
of the objective times that of the eyepieces.
Note) When the Plan Apo and ED Plan series objective for SMZ1000/
■ ON/OFF of the Zooming Knob Clicks
The clicks on the zooming knob can be eliminated.
1 Insert the clamp tool into the screw
2 Turning the inside screw in the
4

Diaphragm

Turning the diaphragm control dial changes the brightness and depth of
focus.
Brightness
Depth of focus
14
800 is used, the total magnification will be obtained by further
multiplying by 0.8.
hole on the right side of the zooming
body.
direction opposite to the arrow
eliminates the clicks (OFF). Turning
the same screw in the direction of the
arrow puts on back the clicks (ON).
Open ⇔ Close
Bright
Shallow
Clik ON
Dark
Deep