Nikon SMZ1500 Instructions Manual page 6

1. Installation location
Note the following points when installing the stereoscopic
microscope.
• Install the microscope in a location with the temperature between
• Do not install the microscope in a location subject to direct
• Install the microscope in a location that is not subject to vibration.
• Install the microscope in a location that is free from dust and dirt.
2. Handle the microscope carefully
The stereoscopic microscope is a precision optical instrument.
Handle it carefully and do not subject it to impact. Shock from
impact during transportation or operation as well as forcible
operations may cause damage to the instrument.
3. Cleaning the lenses
Do not let dust, fingerprints, etc. to get on the lenses. Dirt on the
lenses will adversely affect the view of the image. If any lenses
become dirty, clean them as described below.
• Use an air blower to blow dust away. If this does not suffice, brush
• Only if the lenses become dirty with fingerprints or grease stains,
• Since absolute alcohol is highly flammable, be careful in handling
• Observe the manufacturer's handling instructions when handling
4
0°C and +40°C, and humidity of less than 80%. If installed in a
hot and humid location, mold may form on the lenses or
condensation may occur inside, resulting in reduced performance
or damage to the microscope.
sunlight.
away the dust with a soft brush or gently wipe it away with a piece
of gauze.
slightly dampen a piece of soft, clean cotton cloth with absolute
alcohol (ethyl alcohol or methyl alcohol) and gently wipe away the
dirt. Do not use the same part of the cloth more than once.
it so that it does not ignite.
absolute alcohol.