Nomenclature Of Each Part - Nikon ECLIPSE E200 POL Instructions Manual

I

Nomenclature of Each Part

The microscope is made up of the following components.
(1) Basic unit
(2) Eyepieces
(3) Eyepiece tube
(4) Objectives
Objectives with various magnifying powers are available.
(5) Condenser
Used for condensing light. The condenser should be positioned slightly lower than its
upper limit.
Adjust the aperture diaphragm ring according to the objective.
(6) Polarizing intermediate tube
Used with the analyzer slider and the P-CL plate attached.
Equipped with the Bertrand lens.
(7) Polarizer
Adjust the vibration direction together with the analyzer before use.
(8) Field lens unit
Draw out the field lens unit when changing lamp.
(9) Lamp
Halogen lamp 6 V-20 W or 6 V-30 W is used.
(10) Fuse
Two 250 V 1 A time-lag low-breaking type fuses are used.
(11) Power cord
Use the power cord provided.
8