Conference Calls; To Establish A Conference - Telrad Executive set with expanded display User Manual

CONFERENCE CALLS

A total of five parties, of which up to two may be on outside
lines, can participate in a conference.

TO ESTABLISH A CONFERENCE

1. Make the first call.
2. Press {CONFERENCE}.
3. Make the next call.
After the call is answered:
4. Press {JOIN} to complete the three-way conference.
While in a conference, the display shows SPLT, the
line, and the name or number of the parties to the con-
ference.
If you wish to add another party
to the conference
1. Press [CNF].
2. Make the next call.
3. Press [CNF] again.
To consult privately with a conference member (in a
three-party conference)
• Press the {SPLT} softkey of the required party.
To return to the conference call
• Press {JOIN}.
You are connected with all conference members.
To exit a conference
• Press {CONF EXIT}.
The remaining parties are still connected as long as
there is a system extension in the conference.
Executive set with expanded display 19