Conference Calls - Telrad Avanti Attendant Console User Manual

CONFERENCE CALLS

A total of eight parties, any of which may be on outside
lines, can participate in a conference.
Once a conference is established, you may leave the con-
ference to handle other calls or perform any other activity
and later rejoin the conference.
You may also split the conference to consult privately with
one party without the other conference parties hearing the
conversation.
To establish a conference call
1. Call the first party.
If the first party is on an outside line:
• Press [DIAL CONT] to deactivate dial continuation.
2. Call the next party.
This puts the first party on hold.
If the party is on an outside line:
• Press [DIAL CONT].
After the call is answered:
3. Press {JOIN} to complete the three-way conference.
4. Repeat steps 2 and 3 to add up to five more parties to
the conference.
While in a conference, the display shows SPLT , the line,
and the names or numbers of the parties to the confer-
ence. When there are more than four other parties,
use and
Avanti Attendant console
to display the various SPLT buttons.
29