Answering A Second Call - Telrad Executive set with expanded display User Manual

ANSWERING A SECOND CALL

You may hear a beep, indicating a second call, while
already engaged in a conversation. A {RING} softkey
appears. You can answer the call without disconnecting
the first call.
To answer a second call
1. Press [HOLD].
The first call is put on hold. The indicator for the DN
flashes green. A {HOLD} softkey appears, indicating
which line is on hold. The top line of the display shows
the extension number of the call that is on hold or the
outside line number.
2. Press {RING} - or the other DN button that is flashing
green.
You receive the second call.
To return to the first call
1. Press [HOLD]
2. Press the flashing DN button;
or
• Press the {HOLD} softkey.
If your telephone does not have DN buttons, you
cannot put an internal call on hold. This means that
you cannot answer a second incoming call without
disconnecting the first call - unless the first call was
an outside call. If the first call was internal, you
must hang up. You can then answer the second
call when it rings.
To answer a second call for which you hear
a call waiting tone
When you hear a waiting tone, indicating a second call:
• Hang up. You receive the second call.
Executive set with expanded display
NOTE
13