Programming Call Forwarding For All Dns - Telrad Executive set with expanded display User Manual

PROGRAMMING CALL FORWARDING
FOR ALL DNs
This section is not applicable if your telephone
does not have DN buttons.
You may in one step program forwarding for all the DNs
(for which you are authorized to program Call forwarding)
to the same destination. You proceed as above,
gram Call forwarding, but press {FWD DNS} after press-
ing {CALL FWD}. You can press {FWD DNS} at any stage
of the programming, as long as you do so before entering
the destination number (step 5, above).
If the {FWD DNS} softkey does not appear, you are not
authorized to forward calls from more than one DN at your
station.
Continuing the above example, the display appears:
CFBY I
Empty if there is no
programming or desti-
SALLY SECRETARY
nation is speed dial
CALL FWD
BUSY
NOANS
Select DN. Toggles
100
with {FWD DNS}
EXIT
30
NOTE
FWD DNs
200
ALL
INT
EXT
DELETE
Executive set with expanded display
To Pro-
Toggles with selected
DN softkey.
Appears only if all DNs
have destination