Advertisement
BASIC CALL FEATURES
Placing a Call
Using the handset:
1. Pick up the handset.
2. Enter the number, and then press the SEND soft key.
Using the speakerphone:
1. With the handset on-hook, press
2. Enter the number, and then press the SEND soft key.
Using the headset:
1. With the headset connected, press
Headset
to activate the headset mode.
2. Enter the number, and then press the SEND soft key.
NOTE: During a call, you can alternate between headset, hands-free speakerphone and handset modes by pressing
the HEADSET key or the SPEAKERPHONE key or picking up the handset. Headset mode requires a headset
connected.
Answering a Call
Using the handset:
Pick up the handset.
Using the speakerphone:
Press
Using the headset:
Press
Headset
NOTE: You can ignore an incoming call by pressing the REJECT soft key.
Ending a Call
Using a handset:
Hang up the handset or press the CANCEL soft key.
Using the speakerphone:
Press
or the CANCEL soft key.
Using a headset:
Press the CANCEL soft key.
Futuro
Redial
RD
Press
to enter the DIALED CALLS list, press
RD
press
or the SEND soft key.
Press
RD
twice when the phone is idle to call the last dialed number
Call Mute and Un-Mute
x
Press
to mute the microphone during a call.
x
Press
again to un-mute the call.
Call Hold and Resume
To place a call on hold:
Press the HOLD soft key during an active call.
To resume the call, do one of the following:
If there is only a call on hold, press the RESUME soft key.
If there is more than one call on hold, press
RESUME soft key.
Call Transfer
You can transfer a call in the following ways:
Blind Transfer
1. Press
or the TRAN soft key during an active call. The call is placed on hold.
TRAN
2. Enter the number you want to transfer to.
3. Press
or the TRAN soft key.
TRAN
Semi-Attended Transfer
1. Press
or the TRAN soft key during an active call. The call is placed on hold.
TRAN
2. Enter the number you want to transfer to, and then press
3. Press
or the TRAN soft key when you hear the ring-back tone.
TRAN
Attended Transfer
1. Press
or the TRAN soft key during an active call. The call is placed on hold.
TRAN
2. Enter the number you want to transfer to, and then press
3. Press
or the TRAN soft key when the second party answers.
TRAN
Call Forward
To enable call forward:
1. Press the MENU soft key when the phone is idle, and then select FEATURES->CALL FORWARD.
2. Select the desired forward type:
Always forward
---Incoming calls are all forwarded unconditionally.
Busy forward
---Incoming calls are forwarded when the phone is busy.
No answer forward
---Incoming calls are forwarded when the phone is not answered after a preset
time period.
3. Enter the number you want to forward to. For NO ANSWER FORWARD enter the ring time to wait before
forwarding.
4. Press the SAVE soft key to accept the change.
Call Conference
1. Press the CONF soft key during an active call. The call is placed on hold.
2. Enter the number of the second party, and then press the SEND soft key.
3. Press the CONF soft key again when the second party answers. All parties are now joined in the conference.
4. Hang up the handset to disconnect all parties.
NOTE:
You can split the conference call into two individual calls by pressing the SPLIT soft key.
Speed Dial
To configure a speed dial key:
1. Press the MENU soft key when the phone is idle, and then select FEATURES->DSS KEYS.
2. Select the desired line key, and then press the ENTER soft key.
3. Select SPEED DIAL from the TYPE field, select the desired line from the ACCOUNT ID field, and enter the number
in the VALUE field.
4. Press the SAVE soft key to accept the change.
To use the speed dial key:
Press the speed dial key to dial out the preset number.
^
^
or
to select the desired call, and then
^
^
or
to select the desired call and then press the
#
send
#
send
Advertisement
