Changing The Audible Ringer - Polycom SoundPoint 550 User Manual

User Guide for the SoundPoint IP 550/560 Phone
Note

Changing the Audible Ringer

Note
4 - 8
4. Scroll to select the desired ring type.
To hear the selected ring type, press the Play soft key.
5. Press the Select soft key to change to the selected ring type.
6. Press
If you configure your SoundPoint IP 550/560 phone with a silent ring, press the
flashing Line key or the Answer soft key to answer the call. If your handset is off
hook, the call is routed to the handset. If your handset is on hook, the call is routed
to the speaker.
The SoundPoint IP 550/560 phone can play the audible ringer of an incoming
call through any of its alerting destinations: the speaker, the handset, the
headset (if enabled), or the active destination.
If the Active destination is selected, the audible ringer is played through:
• The speaker, by default.
• The handset, if it is off-hook and the phone is idle.
• The headset, if it is connected and Headset Memory Mode is enabled (refer to
Enabling Headset Memory Mode
To change the audible ringer:
1. Press
2. Select Settings > Basic > Preferences > Audible Ringer.
to return to the idle screen.
on page 4-5).
.