Updating A Contact's Ringtone; Changing The Speaker Volume; Changing The Ringer Volume; Muting The Microphone - Polycom Integra VVX 500 User Manual

Updating a Contact's Ringtone

You can set distinctive ring tones for contacts in your Contact Directory so you can identify callers when
your phone rings.
To select a ringtone for a contact:
1 From your directory, tap the contact to assign a distinctive ring tone to.
2 From the contact's information screen, tap
3 From the Edit Contact screen, tap Ring Type, tap the ringtone you want, and then tap
4 From the Edit Contact screen, tap Save.

Changing the Speaker Volume

To change the volume of what you hear during a call, press one of the Volume keys,
or raise the speaker volume.

Changing the Ringer Volume

To change the volume of the incoming call ringtone, press one of the Volume keys,
your phone is idle or ringing.

Muting the Microphone

Mute the microphone so other parties can't hear you. Microphone Mute applies to all modes (handset,
headset, and speakerphone). You can still hear all other parties while Mute is enabled.
To mute the microphone:
During a call (including a conference call), press
The Mute key glows red. The other parties can't hear you. To disable Mute, press

Choosing Where You Hear Sound Effects

You can choose whether you hear sound effects—all phone sounds except call audio—from the handset,
headset, or speaker. For example, you can configure your phone to ring on your headset, instead of the
speaker. By default, you hear all sound effects from the speaker.
.
.
Chapter 2: Using Basic Features
.
, to lower
, while
again.
41