Table of Contents
Advertisement
Saving Images
B Copying Recorded Images to the DVR's Archive Area
Copying the images that are recorded in the normal recording area and the alarm recording area to the DVR's archive area
If the [OVERWRITE] setting is set to "ON", the DVR will overwrite the previously recorded images sequentially once the
recording area is full. We recommend you store important images in the archive area.
1
Play back the images you want to copy and
click the channel selection button.
The full screen appears, you can start copying.
Use the search function to browse the recorded
images you want to play. (Refer to P14)
2
Click
to freeze the images at the point
where you want to start copying.
3
Click
in the operation panel.
The COPY screen is displayed.
4
5
6
7
4
Choose the [UNIT] of the images to be copied.
The images to be copied can be specified by the
number of images or the duration.
• PICTURES:
Number of images from the starting point (Total
number of images from the channel to be copied)
• TIME:
Duration from the starting point (recording time)
5
Specify the range of the images to be copied.
Specify the value for the [UNIT] you chose in step 4.
• PICTURES: Between 1 and 40,000
• TIME: Hour(s): Minute(s): Second(s)
(00:00:01 - 99:59:59)
6
Check the box of the channel to be copied.
The box of the channel being currently displayed is
automatically checked. The check cannot be removed.
•
: Checks all the channels.
•
: Uncheck the channels except for the
7
Click
Copying operation starts.
Once the copying operation is complete, the result of
the copy is displayed.
To interrupt the copying operation, click
[CANCEL]. The copying operation that was
performed until the interruption is valid,
therefore the images up to that point are saved
in the archive area of the DVR.
8
Click
.
The operation returns to live video.
5
• Copy operations cannot be performed while
playing back images stored in the archive
area.
• Only image data can be copied in the archive
area. If images contain audio data, only image
data is copied.
• If the archive area becomes full during the
recording operation, the copying operation
will automatically be interrupted.
Once the necessary images among the
images saved in the archive area have been
downloaded to such media as a
CompactFlash, click the [AREA FULL RESET]
button under the RECORDING AREA SET and
copying operation restarts. (Refer to P25)
18
(User level: ID2/3)
channel being currently displayed.
.
English
Advertisement
Table of Contents
