Connecting The Ethernet Port Via A Network Hub (Straight-Through Cable); Control Configuration Via The Ethernet Port; Figure 19: Local Area Connection Properties Window; Figure 20: Internet Protocol (Tcp/Ip) Properties Window - Kramer VS-3232A User Manual

VS-3232A 32x32 Audio Matrix Switcher Configurations

Figure 19: Local Area Connection Properties Window

6. Select Use the following IP Address, and fill in the details as shown in
Figure 20.
7. Click OK.

Figure 20: Internet Protocol (TCP/IP) Properties Window

7.8.2 Connecting the ETHERNET Port via a Network Hub (Straight-Through
Cable)
You can connect the Ethernet port of the VS-3232A to the Ethernet port on a
network hub or network router, via a straight-through cable with RJ-45
connectors.

7.8.3 Control Configuration via the Ethernet Port

To control several units via the Ethernet, connect the Master unit
(Machine # 1) via the Ethernet port to the LAN port of your PC. Use your PC
initially to configure the settings (see section 7.8).
27