Table of Contents
Advertisement
7.4.2
Connecting the ETHERNET Port via a Network Hub (Straight-
Through Cable)
You can connect the Ethernet port of the VS-42HDMI to the Ethernet port on
a network hub or network router, via a straight-through cable with RJ-45
connectors, as Table 5 defines:
7.4.3
Control Configuration via the Ethernet Port
To control several units via the Ethernet, connect the Master unit
(Machine # 1) via the Ethernet port to the LAN port of your PC. Use your PC
initially to configure the settings (see section 7.4).
8
Technical Specifications
Table 6 includes the technical specifications:
Table 6: Technical Specifications
INPUTS:
OUTPUTS:
BANDWIDTH:
COMPLIANCE WITH
HDMI STANDARD:
RESOLUTION:
POWER SOURCE:
CONTROLS:
DIMENSIONS:
WEIGHT:
ACCESSORIES:
OPTIONS:
1 Specifications are subject to change without notice
2 For best results, use Kramer cables such as the C-HDMI/HDMI series, the C-HDMI-DVI series and/or our HDMI over fiber
optics C-FOHM/FOHM series
16
Technical Specifications
Table 5: Straight-through Cable RJ-45 PINOUT
Side 1
PIN
Wire Color
1
White-orange
2
Orange
3
White-green
4
Blue
5
White-blue
6
Green
7
White-brown
8
Brown
4 HDMI Connectors
2 HDMI Connectors
Supports up to 1.65Gbps bandwidth per graphic channel
Supports HDMI 1.1 and HDCP
Up to UXGA; 1080p
100 240VAC; 50/60Hz, 10VA
Front panel buttons, Infra-red remote control transmitter, RS-232, Ethernet
19-inch (W), 7-inch (D), 1U (H)
2.5 kg. (5.5 lbs.) approx.
Power cord, IR transmitter
2
Kramer HDMI cables
Side 2
PIN
Wire Color
1
White-orange
2
Orange
3
White-green
4
Blue
5
White-blue
6
Green
7
White-brown
8
Brown
1
of the VS-42HDMI
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Advertisement
Table of Contents
