Table of Contents
Advertisement
7.5.2 Connecting the ETHERNET Port via a Network Hub (Straight-Through Cable)
You can connect the Ethernet port of the VS-66H to the Ethernet port on a
network hub or network router, via a straight through cable with RJ-45
connectors.
8
Technical Specifications
Table 2
includes the technical specifications:
INPUTS:
OUTPUTS:
BANDWIDTH:
COMPLIANCE WITH HDMI
STANDARD:
RESOLUTION:
POWER SOURCE:
CONTROLS:
DIMENSIONS:
WEIGHT:
ACCESSORIES:
OPTIONS:
9
Communication Parameters
RS-232
Protocol 2000
Baud Rate:
Data Bits:
Stop Bits:
Parity:
Command Format:
Example (Output 1 to Input 1):
Ethernet
Default Settings
IP Address: 192.168.1.39
TCP Port #: 5000
1 Specifications are subject to change without notice
2 For best results, use Kramer cables such as the C-HM/HM series, the C-HM/DM series and/or our HDMI over fiber optics
C-FOHM/FOHM series
Technical Specifications
Table 2: Technical Specifications
6 HDMI Connectors
6 HDMI Connectors
Supports up to 1.65Gbps bandwidth per graphic channel
Supports HDMI and HDCP
Up to UXGA; 1080p
100−240V AC; 50/60Hz, 32VA
Front panel buttons, infrared remote control transmitter, RS-232, Ethernet
19" x 7" x 1U W, D, H
2.5kg (5.5lbs) approx.
Power cord, rack "ears", IR remote control
Kramer HDMI cables
Table 3: Communication Parameters
9600
8
1
None
HEX
0x01, 0x81, 0x81, 0x81
Reset Ethernet Default Settings
Power cycle the unit while holding in the Factory Reset
button, located on the rear panel of the unit.
1
of the VS-66H
2
17
Advertisement
Table of Contents
