Connecting The Ethernet Port Via A Network Hub (Straight-Through Cable); Control Configuration Via The Ethernet Port; Figure 5: Internet Protocol (Tcp/Ip) Properties Window - Kramer VS-44HDMI User Manual

Operating the VS-44HDMI 4 x 4 HDMI Matrix Switcher

Figure 5: Internet Protocol (TCP/IP) Properties Window

7.6.2 Connecting the ETHERNET Port via a Network Hub (Straight-Through
Cable)
You can connect the Ethernet port of the VS-44HDMI to the Ethernet port
on a network hub or network router, via a straight-through cable with RJ-45
connectors.

7.6.3 Control Configuration via the Ethernet Port

To control several units via the Ethernet, connect the Master unit
(Machine # 1) via the Ethernet port to the LAN port of your PC. Use your
PC initially to configure the settings (see section 7.6).
16
KRAMER: SIMPLE CREATIVE TECHNOLOGY