Wind Trim; Wind Selection - Raymarine ST70 User Reference Manual

16

Wind Trim

Wind Trim controls the sensitivity of the pilot when
steering in wind vane mode.
MENU
1. Press
Autopilot Calibration and press
2. Use < and > to scroll to Vessel Settings and
ENTER
press
3. Use < and > to scroll to Sailboat Settings and
ENTER
press
4. Use < and > to scroll to Wind Trim and press
ENTER
.
5. Use < and > to increase or decrease the auto
tack delay.
ENTER
6. Press
to exit without making any changes.

Wind Selection

You can specify whether the wind source is to be
true or apparent when steering in wind vane mode.
MENU
1. Press
Autopilot Calibration and press
2. Use < and > to scroll to Vessel Settings and
ENTER
press
3. Use < and > to scroll to Sailboat Settings and
ENTER
press
4. Use < and > to scroll to Wind Selection and
ENTER
press
5. Use < and > to switch between True and Appar-
ent.
ENTER
6. Press
to exit without making any changes.
, then use < and > to scroll to
.
.
to accept the change or
, then use < and > to scroll to
.
.
.
to accept the change or
ST70 Pilot Controller Reference Guide
Sailboat Settings
ENTER
.
Wind Trim
CANCEL
Set the response to wind
i
direction changes
Sailboat Settings
ENTER
.
Wind Selection
CANCEL
Select wind source.
i
Wind Trim
Press ENTER to select.
5
Press ENTER to select.
Wind Selection
Press ENTER to select.
True
Press ENTER to select.