Section 4: Operations; Sanding Belts; Emergency Stop Button - Grizzly G0563 Owner's Manual

SECTION 4: OPERATIONS

Damage to your eyes, lungs, and hearing
could result from using this machine without
proper protective gear. Always wear safety
glasses, a respirator, and hearing protection
when operating this machine.
Keep hair, clothing, and
jewelry away from mov-
ing parts at all times.
Entanglement can result
in death, amputation, or
severe crushing injuries!

Sanding Belts

There are many types of sanding belts to choose
from. We recommend aluminum oxide for general
workshop environments. Below is a chart that
groups abrasives into different classes and shows
which grits fall into each class.
Grit
24–36
40–60
80–100
120–180
220–360
The general rule is to sand a workpiece with pro-
gressively higher grits. Refer to Accessories on
Page 28 for replacement sanding belts.
Model G0563/G0564 (Mfd. Since 10/11)
Type
Very Coarse
Coarse
Medium
Fine
Very Fine
Emergency Stop
Button
The Model G0563/G0564 is equipped with an
emergency stop button on top of the sander.
Should an emergency occur during use of the
sander, immediately press the emergency stop
button. See Figure 12 for emergency stop button
location.
Figure 12. Emergency stop button.
Never use the Model G0563/G0564 for
applications other than those for which it
was made. DO NOT overload the machine
or use excess force when sanding. Severe
personal injury, damage to the machine, or
damage to your workpiece could occur.
-21-