Network Settings - Teltonika RUT100 HSDPA User Manual

4.6.2

Network Settings

This section will allow you to change the local network settings of the router and to configure
the DHCP settings
Figure 9. Network settings.
Router IP address. The IP address of the router. The default IP address is 192.168.0.1.
Subnet mask. The Subnet Mask of the router. The default subnet mask is 255.255.255.0.
Enable DHCP server. Check the box to enable the DHCP server on your router. Uncheck to
disable this function
Enabled DHCP server allows configuring IP addresses pool that will be assigned by the router.
Figure 10. Network settings.
IP address from. Starting IP addresses for the DHCP server's IP assignment.
IP address to. Ending IP addresses for the DHCP server's IP assignment.
Subnet mask. The Subnet Mask of the router. The default subnet mask is 255.255.255.0.
Lease time. Determines how long IP addresses are assigned for you. During the lease time,
the DHCP server cannot assign that IP address to any other clients. The purpose of a lease is to limit
the length of time that a client may use an IP address. A lease prevents unused clients from taking up
IP addresses when there are more clients than addresses. Enter the Lease time in seconds.
WINS address. If WINS (Windows Internet Naming Service ) server is specified, the router
at system startup, will register its name and IP address with the WINS server. WINS server is used for
mapping host names to network addresses. This results in fast and efficient host name resolution.
Specify WINS server IP address.
Domain. Enter the domain name for the Router. Some ISP's require it for identification.
Check your ISP to see if your broadband Internet service has been configured with a domain name. In
most cases, leaving these fields blank will work.
18 | P a g e