4.8 Admin
Use the Admin menu to define access settings to the device, or to use the following system
utilities:
Account – change administrator's password.
Management – administrative access settings.
Maintenance – new firmware upgrade, reboot or reset to factory defaults the device.
4.8.1
Account
The Administrative Account menu is used for changing the existing administrators' password.
Figure 36. Change administrator password
Username – displays the username of the current connected administrator. This parameter is
not changeable.
Old password – enter the old administrator password.
New password – enter the new administrator password for user authentication.
Verify password – re-enter the new password to verify its accuracy.
Note: The only way to gain access to the web management if you forget the administrator
password is to reset the device factory default settings. Default administrator login settings are:
User Name: admin
Password: admin01
4.8.2
Management
This section allows configuring device management settings for SNMP and RCMS. Both
protocols use same friendly name which is written in the friendly name section.
Figure 37. Friendly name for SNMP and RCMS
4.8.2.1
RCMS
RCMS is a centralized monitoring and management solution for wireless network equipment.
At the heart of RCMS is a powerful and efficient engine that securely gathers, interprets and records
information from registered network devices, and makes that information available to network
administrators through a convenient, secure, and attractive Web interface to enable RCMS remote
control management check the box.
35 |
P a g e