Appendix C Updating Router Firmware - Teltonika RUT100 HSDPA User Manual

9 Appendix C Updating router firmware

Step 1 Connect to router WEB configuration page. Then go ADMIN then Maintenance to
upgrade system firmware.
Step 2 To update your device firmware click Browse button to select the new image from a
folder on the PC and click the Upload button:
Step 3 When the new firmware image is uploaded to the router's temporary memory it is
necessary to save the firmware into the router's permanent memory. Click the Upgrade button.
During the upgrade the router will reboot. Overall process takes several minutes.
Step 4 After the router is rebooted it is required to reset router to defaults. To do that connect
to router WEB configuration page. Then go ADMIN, Maintenance and use the Factory Defaults
menu to reset device parameters into factory defaults
48 | P a g e