Connect To Router Web Configuration Page Using Wireless Connection - Teltonika RUT100 HSDPA User Manual

4.2 Connect to router WEB configuration page using wireless connection

Note: the Wireless network function is shipped disabled by default and the configuration for
the first time can be made only by using wired connection.
Step 1 Setup wireless network adapter on your
computer (Go
Connections>Right
Connection associated with the wireless adapter and
select Properties):
Step 2 Setup the wireless network adapter's IP address
(choose Internet Protocol (TCP/IP) and click Properties):
Setup the wireless network adapter to
Obtain an IP address automatically and
Obtain DNS server address automatically
Note: It is possible to assign manually static IP address within
192.168.0.2 - 192.168.0.254 address range with mask 255.255.255.0,
gateway 192.168.0.1 and DNS server 192.168.0.1.
Step 3 Enable the wireless network connection.
Right click on Wireless Network Connection and chose
Enable.
Step 4 Choose the wireless network (default: www.teltonika.lt) from the list of available wireless
networks.
Step 5 Open the Web browser and type the device IP address (default 192.168.0.1) and enter
the 3G Mobile Router administrator login details to access the Web management.
The default administrator login settings are:
Login:
Password:
Step 6 After successful administrator log on you will see the main page of the 3G Mobile
Router Web configuration interface. The device now is ready for configuration.
to Start>Settings>Network
click on Wireless
admin
admin01
Network
11 | P a g e