Safety Information - Teltonika RUT100 HSDPA User Manual

1 SAFETY INFORMATION

In this document you will be introduced how to use 3G Mobile Router safely. We suggest you
to adhere to following recommendations to avoid any damage to person or property.
You have to be familiar with the safety requirements before starting to use the device!
3G Mobile Router is used to provide a mobile Internet access using a GSM network. To avoid burning
and voltage caused traumas, of the personnel working with device, please follow these safety
requirements.
To avoid mechanical damages of the device it is recommended to transport the device packed
in damage-proof pack. While using the device, it should be placed so, that its indication LED would be
visible as they inform in which working mode the device is and if it has any working problems.
Protection against over currents, short circuits and earth faults should be provided as a part of
the building installation. Two pole protective device is required to protect from short-circuit and earth
false. The power of connected device should satisfy power of release device. To disconnect the device
plug off AC/DC power adapter from the wall outlet or power strip. The interstice between contacts
should be no less than 3mm.
Signal level of the device depends on the environment in which it is working. If the device
starts working insufficiently only qualified personnel may repair this product. We recommend to
forward it to repair centre or to manufacturers. No exchangeable parts inside of the device.
Device requires power supply source that satisfies all safety
requirements listed in LST EN 60950-1 standard. Each power
supply source should not exceed 15VA.
The PC and power supply source, to which the device is
connected, should satisfy LST EN 60950-1 standard. The device
can be used on first (Personal Computer) or second (Notebook)
computer safety class.
Disconnect device from power supply before mounting to avoid
voltage effect!
Do not mount or serve device during a thunderbolt.
5 | P a g e