Clock/Ntp - Teltonika RUT100 HSDPA User Manual

Figure 39. SNMP settings
Enable SNMP – check the box to enable SNMP service.
System location – specify the physical location of the router [string].
System contact – specify the textual identification of the contact person for the router
together with information on how to contact this person [string].
Read only community (v1/v2) – specify the read-only community name for SNMP version 1
and version 2c [string]. The read-only community allows a manager to read values, but denies any
attempt to change values.
Read only user (v3) – specify the user name for read-only SNMP version 3 access [string]. The
read-only community allows a manager to read values, but denies any attempt to change values.
Read only user password (v3) – specify the password for read-only SNMPv3 access [string].
4.8.2.3

Clock/NTP

Use this section to manage the system time and date on the device automatically, using the
Network Time.
Figure 40. Time setting using NTP
To add time server click button Add. The new field with server will appear.
Timezone – select the time zone. Time zone should be specified as a difference between local
time and GMT time.
Add – click to add NTP server
Delete – click to remove selected NTP servers from the device system.
Server IP – specify the trusted NTP server IP address or hostname for synchronizing time.
Note: Up to 16 NTP servers can be configured on the router.
37 | P a g e