Dynamic Dns Settings - Teltonika RUT100 HSDPA User Manual

Retries – specify the number of times authentication/accounting request is retransmitted [0-
99]. Default: 2.
Secret – specify the shared secret of the authentication/accounting server [string]. The shared
secret is used to encrypt data packets transmitted between RADIUS server and client.
Note: Shared secrets must be the same on the RADIUS servers and the RADIUS client.
Strip WISP – select this option if you want to remove the WISP domain prefix from the
username before sending it to the RADIUS server. Default action is to send the username as is.
4.6.4

Dynamic DNS Settings

Dynamic DNS (DDNS) is a domain name service allowing to link dynamic IP addresses to
static hostname. To start using this feature firstly you should register to DDNS service provider.
Figure 18. Dynamic DNS Settings.
Enable Dynamic DNS – check the box to enable DDNS.
User name - enter your user name. The router will use it to automatically login to update your
IP address in the DDNS server.
Password – enter you login password.
Hostname - enter your hostname which was registered in DDSN server.
Update period – enter IP address update time in seconds.
DynDNS service type – DYNDNS service type. Allowed service types are:
dyndns.org: dyndns@dyndns.org OR statdns@dyndns.org OR customdns@dyndns.org
freedns.afraid.org: default@freedns.afraid.org
zoneedit.com: default@zoneedit.com
no-ip.com: default@no-ip.com
easydns.com: default@easydns.com
3322.org: dyndns@3322.org
22 | P a g e