Precautions In Sales Promotion; Safety Instructions - Hitachi CM 5SB Technical Data And Service Manual

PRECAUTIONS IN SALES PROMOTION

1. Safety instructions

In the interest of promoting the safest and most efficient use of the Models CM 5SB, CM 9SR and CM9UBY
Cutters by all of our customers, it is very important that at the time of sale, the salesperson carefully
ensures that the buyer seriously recognizes the importance of the contents of the Handling Instructions,
and fully understands the meaning of the precautions listed on the Name Plate.
A. Handling instructions
Although every effort is made in each step of design, manufacture and inspection to provide protection
against safety hazards, the dangers inherent in the use of any electric power tool cannot be completely
eliminated. Accordingly, general precautions and suggestions for the use of electric power tools, and
specific precautions and suggestions for the use of the Cutters are listed in the Handling Instructions to
enhance the safe and efficient use of the tool by the customer.
Salespersons must be thoroughly familiar with the contents of the Handling Instructions to be able to offer
appropriate guidance to the customer during sales promotion.
B. Caution on name plate
Each tool is provided with a Name Plate which contains the following basic safety precautions in the use of
the tool.
(1) For Europe
(2) For the U.S.A. and Canada (Model CM 5SB)
WARNING
To reduce the risk of injury, user must read and understand instruction manual.
Always use guards and wear eye protection.
Use only accessories rated at least 12000/min.
AVERTISSEMENT
Afin de reduire le risque de blessures, I'utilisateur doit lire et bien comprendre le mode
d'emploi.
Utilisez toujours un outil muni d'un protecteur et portez des lunettes on une visiere.
N'utilisez que des accessoires prevus pour au moins 12000/min.
C. Precautions on usage
Never press the pushing button while the diamond wheel is rotating.
If the pushing button is pressed while the diamond wheel is rotating, the spindle will stop immediately.
In such a case, there is a danger that the wheel nut may be loosened so that the diamond wheel flies off
unexpectedly to cause possible serious injury.
4