Telstra T-Box Getting Started Manual page 20

RESET OPTIONS
You'll find the Reset button on the bottom of your T-Box
options available to you:
Reset button
Re-Start
Press Reset Once.
Restarts your T-Box. Your
T-Box will power off as
soon as you release the
reset button. Press the
'power' button on the
remote control to turn it
back on.
IMPORTANT NOTE:
off by putting it in deep sleep mode. Press the power button on the remote for 3
seconds until you see the on screen message 'Entering sleep mode; please wait.'
Only when the T-Box powers down is it safe to switch off from the power point.
Never pull the cord out of the T-Box directly as it could cause issues with the hard
drive of your T-Box
18
Remote Pairing
Press Reset Two Times.
Resets the remote control
pairing, so that you can
re-pair your existing
remote control or pair a
new remote control to
your T-Box.
Before disconnecting the power supply, first turn your T-Box
. There are three reset
®
Reset
Press Reset Five Times.
Erases all settings so you
can re-run the entire
set-up process.
No recordings or movies
are deleted.
Recordings currently in
progress are stopped.