Auto Scan Setup; Activate Auto Scan; Flip - Qvis Iapollo SMART dvr User Manual

4.9.7 Auto Scan Setup

In Figure 4-38, click the border button. The interface is shown as in
to F igure 4-35, use direction arrows to select camera left limit
X 3 4 9 H 3 4 9 H 3 4 9 H X 3 4 9 H 3 4 9 H 3 4 9 H
Then go to Figure 4-43 and click left limit button
X
Repeat the above procedures to set right limit.

4.9.8 Activate Auto Scan

In Figure 4-42, click "Auto Scan" button, the system begins auto scan. Correspondingly, the auto
scan button becomes Stop button. Click stop button to terminate scan operation.

4.10 Flip

In Figure 4-42, click page switch button, you can see an interface is shown as below. See Figure
4-47. Here you can set auxiliary function. The aux value has relation ship with the Aux button of
the decoder.
Click page switch button again, system goes back to Figure 4-38.
© Copyright Qvis ®. All documentation rights reserved.
Figure 4-46
Figure 4-47
Figure 4-43. Please go
X 3 4 8 H 3 4 8 H 3 4 8 H
43