This section provides information about front panel and rear panel. When you install
this DVR for the first time, please refer to this part to start off with.
2.1 Front Panel
The front panel is shown as below. See Figure 2-1.
Please refer to the following sheet for detailed information:
SN
Name
Network status indicator
1
light
2
Power indicator light
3
HDD status indictor light
4
USB
© Copyright Qvis ®. All documentation rights reserved.
2 Front Panel and Rear Panel
Figure 2-1
Function
The red light turns on when the network connection
is abnormal.
The red light turns on when the power connection
is OK.
The red light turns on when HDD is abnormal.
USB port
6