System - Qvis Iapollo SMART dvr User Manual

Please refer to the following sheet for detailed information:
Parameter Function
Here you can view channel number.
Channel
The number displayed here is the max channel amount of your
device.
Status There are three statuses: schedule, manual and stop.
System enables auto record function as you set in record schedule
Schedule
setup (general, motion detect and alarm).
This has the highest priority. Enable corresponding channel to
Manual
record no matter what period applied in the record setup.
Stop current channel record no matter what period applied in the
Stop
record setup.
Check the corresponding All button, you can enable or disable all
Start all/
channels record.
stop all

7.8.5 System

7.8.5.1 General
The general interface includes General, date/time and holiday setup.
7.8.5.1.1 General
The general interface is shown as in Figure 7-64.
© Copyright Qvis ®. All documentation rights reserved.
Figure 7-64
143