Activate Patrol (Tour); Pattern Setup; Activate Pattern Function; Auto Scan Setup - Qvis Izeus hdcvi dvr User Manual

4.9.4 Activate Patrol (tour)

In Figure 4-39, input patrol (tour) number in the No. blank and click patrol button

4.9.5 Pattern Setup

In Figure 4-39, click pattern button and then click "begin" button. The interface is shown as in
Figure 4-43. Then you can go to Figure 4-36 X to modify zoom, focus, and iris.
Go back to Figure 4-43 and click "end" button. You can memorize all these operations as pattern
1.

4.9.6 Activate Pattern Function

In Figure 4-39, input mode value in the No. blank, and click pattern button.
X 3 4 6 H 3 4 6 H 3 4 6 H

4.9.7 Auto Scan Setup

In Figure 4-38, click the border button. The interface is shown as in
to F igure 4-35, use direction arrows to select camera left limit
X 3 4 9 H 3 4 9 H 3 4 9 H X 3 4 9 H 3 4 9 H 3 4 9 H
Then go to Figure 4-43 and click left limit button
X
Repeat the above procedures to set right limit.
© Copyright Qvis ®. All documentation rights reserved.
Figure 4-42
Figure 4-43
Figure 4-43. Please go
X 3 4 8 H 3 4 8 H 3 4 8 H
48