Rgb Board - Toshiba TECRA A9 Series Maintenance Manual

Hide thumbs Also See for TECRA A9 Series:

Table of Contents

4 Replacement Procedures

4.18 RGB board

Removing the RGB board

To remove the RGB board, follow the steps below and refer to Figure 4-29 and 4-30.

1. Peel the insulator and take out the LAN jack from the slot. (Be careful, because the

LAN jack cable is still connected to the connector on the back of the system board.)

LAN jack cable

Figure 4-29 Removing the RGB board (1)

4-48 [CONFIDENTIAL] TECRA A9/TECRA S5/TECRA P5/Satellite Pro S200 Maintenance Manual (960-633)

Show Quick Links

Table of Contents